MATERIALS NEEDED
24" eighteen-gauge sterling silver wire
Pre-built sterling silver cuff bracelet
(You may make your own cuff bracelet from hefty
gauge sterling silver rectangle wire if you like.)
Instruments NEEDED
Liver of sulfur or oxidizing Resolution
Ruler
Marker
Spherical nose pliers Wire cutters or tin snips File
Chain nose pliers Good steel wool Sharpening fabric Safety glasses
one. Utilize liver of sulfur or oxidizing Remedy into the 24" of eighteen-gauge sterling silver wire.
It is vital to comply with any basic safety tips the manufacturer suggests around the directions when working with any chemical substances. You might utilize the good steel wool within the oxidized wire to remove several of the darkened parts When you finish the wrapping system.
2.Use the ruler to evaluate and mark the 24" of eighteen-gauge wire into four sections. Evaluate and mark the wire at 7", 12*. and 17".
three.Next, measure and mark the middle of the best on the cuff bracelet (since it’s curved, you are able to just type of eyeball it). Then use the ruler to evaluate and mark %" from the center in the cuff to each side.
four.Firmly grasp the marked Middle in the 24" 18-gauge wire in the jaws of the spherical nose pliers. Use your fingers to bend the edges right down to kind an upside-down U shape (the wire will resemble a sizable bobby pin).
When dealing with extensive pieces of wire, safety Eyeglasses are advised.
five.Slide the wire onto the sterling silver cuff bracelet to the center mark. Pinch the wire tight onto the cuff bracelet and, whilst Keeping the wire about the cuff along with your fingers, wrap one facet on the wire randomly toward the Vi' mark that you just created on the top with the cuff bracelet. You will need to look at exactly where the seven" along with the seventeen' marks are about the wire and use them to match up Together with the Vi" mark which you produced to the cuff bracelet.
eight. Make use of the spherical nose pliers to curl the ends of your wire up in to the wrapped wire on the underside in the cuff bracelet. Utilize the chain nose pliers to firmly squeeze the ends up into the opposite wrapped wire. This can retain the ends securely in position.
six.Complete wrapping the wire on one other side, matching up the seven" as well as the seventeen" marks around the cuff bracelet While using the Vi" marks within the eighteen-gauge wire.
seven.Now wrap the wire on one aspect again toward the center on Βαπτιστικοι σταυÏοι the cuff bracelet. Then wrap the wire on one other facet on the cuff bracelet back again towards the middle. You may have to trim and file the ends of your wire so which they wind up on the bottom of your cuff bracelet.
nine. Use fine steel wool to get rid of the darkened space within the surface area with the wire, leaving the parts within the crevices on the wrapped wire darkish. Buff the wrapped ΜονόπετÏα τιμÎÏ‚ wire as well as cuff bracelet with a polishing cloth.
What tips would you present you with a commencing artist?
Λ portrait Trainer once informed me that through the 500th portrait I can be ασημÎνια κολιΠdefinitely good. Lesson-practice; observe every day.
Stick to one medium and get it done really well. Craftsmanship is key.
This cuff is great for Gentlemen and also Girls. Make use of the much larger Adult δαχτυλίδια μπÏιγιάν men's dimensions of pre-designed cuff bracelet and incorporate further ασημÎνια βÏαχιόλια size on the 18-gauge sterling silver wire, typically six to 8 inches to support
the much larger Adult men’s cuff bracelet.
